The digital interface of an induction cooktop can set it apart from other types of stoves since it can provide faster and more precise control. But the irony of this advancement is it could also be part of its drawback.
Since you’ll have to rely on its control panel to make your induction work, it can be startling when it suddenly won’t turn on.
There are plenty of reasons why your induction stove may be experiencing this issue.
But there’s no need to panic since this article will explain the causes and help you figure out how to troubleshoot the problem.
Why is my induction cooktop not turning on?
Figuring out why your induction stove won’t turn on can be tricky, especially when it’s your first time owning one.
But here are a few common reasons why an induction stovetop can malfunction:
1. Safety lock feature
Most induction stoves have a safety lock feature that prevents you from powering your cooktop and adjusting its settings.
The purpose of this function is to avoid any unwanted operation, so it can be handy if you have small children that can reach your stovetop’s control panel.
Some induction models have a separate button for this function, and you or your family member may have unknowingly pressed it. A number of brands also have this feature activated by default when you first install your stove.
2. Dirty control panel
Since induction cooktops have a touchscreen display, there may be cases where the sensors won’t recognize your commands because it has a layer of grease or dirt over the screen.
That’s why manufacturers highly recommend you clean your cooktop’s surface after using it.
Also, remember to refrain from operating the control panel when your hands are wet since the water can create a barrier that will prevent the sensors from reading your commands.
3. Faulty electrical connection
Another common issue you’ll have to consider is whether your induction stove is correctly plugged into a functioning power source.
Since it won’t work without electricity, you’ll have to make sure the circuit breaker isn’t damaged or tripped. If you see any problems with the fuse box, you’ll have to call a licensed electrician to repair it.
4. Malfunctioning burners
If your induction cooktop doesn’t appear to have any issues on the surface and its electrical components, there is a possibility the damage is in its internal components.
There may be parts that need replacing or disconnected and damaged wires that require fixing.
Since you’ll need to take your induction cooktop apart to confirm this, it’s best to leave this job to a professional installer to prevent damaging your unit further.
What to do if induction isn’t working?
Troubleshooting is the only way to figure out why your induction stovetop won’t turn on. To help make the process easier, here’s a general step-by-step guide on how to pinpoint the issue:
1. Check if the plug it’s properly connected to its power source.
2. Inspect the circuit breaker for any damages. You can also try resetting your stovetop by turning the circuit breaker off for a few seconds before turning it back on.
3. Wipe the control panel with a clean cloth or paper towel to remove any old grease or water stains.
4. Remove any objects that are covering the control panel.
5. Try deactivating the lock mode feature of your cooktop. You can refer to the manual to see the steps.
Considering each brand and model will have different instructions for troubleshooting, you can also refer below for specific directions based on the brand of your cooktop.
RELATED: Induction cooktop keep turning off
Why is my Bosch induction cooktop not turning on?
If you have a Bosch induction stove that won’t turn on, their instruction manual recommends you inspect its plug to see if it’s connected properly.
If it is, try to plug another electrical device into the socket to see if it’s functioning.
If the socket works, try deactivating the child lock feature in case you or someone in your household accidentally turns it on. To do this, press the key symbol on your cooktop for 4 seconds.
If your induction stove still won’t turn on, you might need to contact Bosch customer service for further instructions or to request service.
Why is my Miele induction cooktop not turning on?
Miele induction cooktops have a system lock feature that won’t let the stove or the timer turn on when it’s activated. This feature is set to activate manually when it’s first installed, but it’s better to check if it’s triggered by accident.
To deactivate, tap the lock symbol and the ‘0’ button of the right-side burners of your cooktop until the ‘LC’ symbol pops up on the display screen.
If that won’t fix the issue, Miele recommends checking the circuit breaker to see if it’s tripped. Otherwise, you’ll need to reset your induction stove by unplugging it from the power source or turning off the circuit breaker for 1 minute.
Read More: Troubleshooting Miele Induction Cooktop Error Codes
Why is my Jenn Air induction cooktop not turning on?
Considering Jenn Air induction stoves have a dedicated Control Lock button, the feature can easily get activated by accident. Since this will prevent your cooktop from powering on, you can disable the security feature by holding the button for 3 seconds.
If that still won’t solve the problem, you’ll have to look at the circuit breaker in case it’s tripped. If not, it could be wiring issues, and you’d have to call a qualified installer or electrician.
Why is my Samsung induction cooktop not turning on?
If you have a Samsung induction cooktop that’s malfunctioning, their official website has a few instructions on how to troubleshoot the issue:
- To check if the circuit breaker has tripped, turn it off for 30 seconds before turning it back on. If it trips after turning on, this might be the culprit, and you’ll need to call an electrician.
- Since turning off its circuit breaker will reset your induction cooktop, try to turn it on to see if it has fixed the issue.
- If it still won’t function, turn off the circuit breaker and inspect the wires under the cooktop for any damages or disconnection. You’ll need to call an installer if you see a disconnected wire. But if the cables have damages, you’ll need to request a repair service.
- If your stovetop still doesn’t turn on after the previous steps, you can contact their support center to request a repair service.
Why is my Smeg induction cooktop not turning on?
If your Smeg induction stove won’t turn on, their instruction manual suggests wiping the control panel with a clean cloth in case the buttons have a layer of grease or water stains.
If that won’t work, check to see if the locking feature’s on by pressing the locking button for 6 seconds to deactivate it. There should also be an indicator light that lets you know when the feature is on or off.
If your stovetop still doesn’t work, check its electrical plug or circuit breaker to see if it’s cut off. You’ll need to call a professional electrician to repair it if it’s an electrical issue.
Why is my Fisher and Paykel induction cooktop not turning on?
To troubleshoot a Fisher and Paykel induction cooktop, their manual advises checking if it’s properly connected to a functioning power supply. If the wires are okay, find out whether there’s no power outage in your area.
Fisher and Paykel induction cooktops have a control lock feature, but you need to turn the cooktop on to enable and disable the function.
Plus, it has an indicator light above the button to let you know if it’s on or off.
So if your cooktop still won’t turn on, it might be a wiring or internal issue, and you’ll have to contact their customer support to request service.
Why is my Electrolux induction cooktop not turning on?
If you tried powering your Electrolux induction stovetop on but it’s not functioning, you might have touched 2 or more sensor buttons at the same time, so try touching them one at a time.
If not, try wiping the control buttons with a clean cloth in case it has accumulated grease or water stains. If that still won’t fix the problem, try turning your appliance one more time and choose a heat setting within 10 seconds.
If none of the steps above worked, check the plug and circuit breaker for any damages. If not, you can call their customer support for further instructions.
Why is my Wolf induction cooktop not turning on?
Like most modern cooktops, Wolf induction cooktops have a lock mode feature that automatically activates when it’s first installed or after a power outage.
If this prevents your induction from powering on, try to deactivate it by touching the lock symbol for 3 seconds. You’ll know when it’s unlocked when the indicator light turns off.
If that won’t work, check the power source and circuit breaker in case they’re damaged or disconnected. If that’s the case, you’ll have to call in a professional for repairs.
Why is my Westinghouse induction cooktop not turning on?
If you have trouble powering a Westinghouse induction stovetop on, you might have pressed 2 or more sensor buttons at the same time. Turn the power button on again but make sure to touch one sensor at a time.
Once you press the power button, you’ll also have to select a heat setting within 10 seconds, or else the stovetop will automatically shut off. But if that’s not the issue, check to see if the plug is connected correctly or if the circuit breaker isn’t tripped or blown.
The bottom line
Having a malfunctioning induction cooktop can be alarming, especially when you just have it installed. But there’s no need to panic since there are steps to determine the cause of the issue.
In most cases, it’s just a dirty control panel or an unplugged power cord. But there may also be instances where the circuit breaker is at fault.
Good thing most induction cooktop brands offer customer support so you can contact them for specific instructions or request a service for repairing your unit.
Leave a Reply